Kwik Klamp – Pipe Clamp


Used World Wide

The most popular patented tool used worldwide by well drillers, pump installers, well servicemen and environmental drillers.  J&K Tool Company, Inc. has been manufacturing the Kwik Klamp for over 40 years.

Kwik Klamp 1 Details:

All steel construction but light weight-only 14 lbs.

Easy to operate, over center locking of jaws when downward pressure is applied to lever.

Kwik Klamp allows workers to bring pipe joint up to an easy working level.

Equipped with serrated and hardened replaceable jaws.

KWIK KLAMP is one of the safest time saving tools you will ever own.


•  Excellent holding capability with load tests over 3500 lbs.
KK1 Load Test Report: ESP026328P J&K Tool KK1 Final

•  Designed to hold pipe sizes 1″ – 2″ (1.315″OD-2.375″OD)  PVC, stainless & galvanized (not intended for bare steel drill rod).

•  Safety pin to prevent accidental unclamping.
•  Easy one hand operation.
•  Size adjustment and tension bolt located inside of front jaw protected from dirt and water.

NEW – Replaceable Jaw Sets

Size specific jaw sets for the Kwik Klamp 1.

1″ Jaw Set [part#: KK1 1.0]

1 1/4″ Jaw Set [part#: KK1 1.25]

$50.00 per set with bolts

Additional Jaw Sets for KK1:

  • The serrations on the jaws are machined with a precision CNC mill to the exact pipe OD dimension which increases holding capacity and reduces pipe distortion.
  • Jaws are made from high grade carbon steel and heat treated for strength, dependability and long life.

Contact one of our many distributors to place an order: