Kwik Klamp 3 – Pipe Clamp

KWIK KLAMP 3

Kwik Klamp 3 for 6″ PVC Pipe

The heavy duty KWIK KLAMP 3 is designed to hold 6″ PVC pipe.  This klamp can also hold 5″ PVC pipe with an additional jaw set.  The Kwik Klamp has been used worldwide by environmental drillers, pump installers, well serviceman and water well drillers.

Kwik Klamp 3 Details:

• Main body constructed of 2″ & 2 1/2″ 1/4″ wall steel tube.


Easy to operate, over center locking of jaws when downward pressure is applied to 19″ long lever handle.


1/2″ safety pin used to prevent accidental unclamping.


Allows workers to bring pipe or drill joint up to an easy working level.

Specifications & Capabilities

• The tool weights only 37 lbs. and is 20″ long x 7 1/2″ wide.
• Designed to hold 6″ PVC or HDPE pipe.
• Jaws are equipped with 20 carbide tipped grippers (3/8-16×1/2).
• Excellent holding capability. Load tests on flush joint PVC pipe 4,000 lbs;  load tests on PVC pipe with klamp holding under a bell 7500 lbs.

Load Test Reports:
1) KK3 Flush Joint PVC ESP026328P J&K Tool
2) KK3 BellEnd PVC ESP026328P J&K Tool 

• KWIK KLAMP is one of the safest, time saving tools you will ever own.

The Kwik Klamp 3 is also capable of holding 5″ PVC pipe with the additional jaw pads and bolts.

Conversion Kit for 5″ pipe:
• (10) jaw pads
• (20) 3/8-16 x 1 carbide tipped gripper bolts

Kwik Klamp 3 Pricing

Contact one of our many Distributors to place an order:

Additional Tools and Machines