J&K TOOL COMPANY INC

Home KWIK KLAMP 1 KWIK KLAMP 2 Elevators Flush Joint Pipe Clamps Machine List


JK905 PVC Flush Joint Threading Machine

The JK905 has the capability to thread PVC pipe sizes of 1/2" up to 8" (8.625")

 

 

 

 

monotone touch screen
Text Box:

 

 

 
This machine is equipped with a 9" ID hollow spindle which is rotated by a 1hp gear motor powered by an AC frequency drive. The new design incorporates touch screen programming for all dimensions and movements. The automated movements are performed by hybrid stepper actuators and is controlled by a sophisticated PLC which has the capability to store 10 different thread dimensions and specifications (5 pin and 5 box). The thread cutting motor is a 3 hp 3500 rpm powered by an AC frequency drive. An additional 2 hp motor is used for cutting the part off and oring groove when needed. The new JK905 PVC flush joint threading machine has been designed with the latest state of the art micro processing components. The machine’s ease of setup and supreme accuracy will truly amaze you. 

The touch screen programming gives you the ability to easily change thread dimensions. The PLC has the capability to store values for 10 different thread recipes, 5 box and 5 pin. Each step of setting up the thread values is described on their own screen. Once you have entered the appropriate dimensions for each step, the information will be stored and will not have to be entered every time.

 

Machine can be setup with 6 different thread pitches. The thread ratios are easily entered through touch screen. No gears, chains or lead screws to adjust. It is all electronically linked from spindle to actuator. Some thread ratios are 2 TPI, 4 TPI, 8 TPI, 3 TPI, 11 1/2 NPT, 8 round taper, 6mm DIN, or 12mm DIN and more. Changing between pipe sizes is much simpler on this machine. First change pipe holding collets and thread cutter if going from ID to OD. From there you will press "Thread Selection" and select the appropriate TPI and thread recipe. 

 

 

 

 

The new machine has proven to be extremely dependable and trouble free.  This system can be compared to a scaled down version of a CNC lathe but with more simplicity and ease of operation.  The long term dependability is a result of converting to an electrical system instead of air.  This design simplifies the machine by considerably reducing the number of parts required to operate.

 

                                        

   

 

 

 

 

 

 

 

 

 

Additional Specifications:
- 230 volt 3 phase, approximate draw: 15 amps
- 15’ adjustable pipe roller support
- Vacuum fixtures around cutters requires no less than 1 hp dust collection vacuum.

Approximate Thread Times
4" pipe 2 tpi, .042" step, pin or box thread: 2-3 minutes
2" pipe 2 tpi, .042" step, pin or box thread: 1 1/2-2 minutes

JK905 PVC Flush Joint Threading Machine (basic price)..............................USD$23,000.00

 

 

 

 

JK905 Accessories:
Pipe Holding Collets with nylon insert (set of 2)
sizes 1/2", 3/4", 1", 1 1/4", 1 1/2" or 2"		 (per set) $395.00
Pipe Holding Collets (set of 2)
sizes: 3", 4", 4 1/2", 5", 6" or 8"		 (per set) $375.00
Part Off Saw $40.00-55.00
Arbors:
  7/8" x 1" for part off saw
  7/8" x 1" for thread cutters
  7/8" x 3/8" for ID mill cutter
  7/8" x 1/2" for ID mill cutter		 $110.00
Thread Cutters:
  3" x 1/4" x 1" bore, 8 tooth, 2 tpi $325.00
  3" x 1/4" x 1" bore, 10 or 12 tooth, 2 tpi $350.00
  3" x 1/8" x 1" bore, 8 tooth, 4 tpi $250.00
  3" x 1/8" x 1" bore, 12 tooth, 4 tpi $295.00
ID Mill Cutters:
  7/16" OD x 3/8" shank, 4 tooth, 4 tpi $125.00
  3/4" OD x 1/2" shank, 4 tooth, 2 or 4 tpi $150.00
2hp motor for part off & oring groove
3hp motor for thread cutting

 

 

 

 

 

 

 

 

 

 
Inside collection chamber

 

 

 

 

For more information, please contact:

J&K Tool Company, Inc.

6385 County Road 7

Wheaton, MN  56296-5086  USA

Tel: 320.563.4967   Fax: 320.563.8051

E-mail:  sales@jktool.com

 

Back to Machine List

 

  HOME  |   KWIK KLAMP  |  KWIK KLAMP 2  |  ELEVATORS  |   FLUSH JOINT CLAMP