J&K Tool Company, Inc.
| Home | Kwik Klamps | Elevators | Flush Joint Pipe Clamps | Machine List |
KWIK KLAMP 3
The heavy duty KWIK KLAMP 3 is designed to hold 6" PVC pipe. This Klamp can also hold 5" pipe with an additional jaw set. The KWIK KLAMP 3 is very similar to the KWIK KLAMP 2 which is for pipe sizes 2 1/2" through 4". The Kwik Klamp has been used worldwide by environmental drillers, pump installers, well serviceman, and water well drillers.
 |
Main body is constructed of 2" and 2 1/2" 1/4" wall steel tube. |
|
|
Easy to operate, over center locking of jaws when downward pressure is |
| applied to a 19" long lever handle. | |
|
|
1/2" Safety pin used to prevent accidental unclamping. |
|
|
KWIK KLAMP 3 allows workers to bring pipe or drill joint up to an easy working level. |
|
|
The tool weights only 37 lbs. and is 20" long x 7 1/2" wide. |
|
|
Jaws are equipped with 20 carbide tipped grippers (3/8-16x1/2). |
|
|
Excellent holding capability, with load tests done over 7,000 lbs. |
|
|
Designed to hold 6" PVC or HDPE pipe. |
|
|
KWIK KLAMP is one of the safest, time saving tools you will ever own. |
Kwik Klamp 3 for 6" PVC pipe
Kwik Klamp 3 for 5" PVC Pipe
The Kwik Klamp 3 is also capable of holding 5" PVC pipe with the additional jaw pads and bolts.
Conversion Kit for 5" pipe:
(10) jaw pads
(20) 3/8-16 x 1 carbide tipped gripper bolts
|
Kwik Klamp 3 Pricing |
||
| Description |
Part # |
Prices |
| Kwik Klamp 3 (for 6" PVC pipe only) |
KK3 |
US $495.00 |
| 1 set KK3 jaw pads & bolts for 5" PVC pipe | KK3JP |
US $199.00 |
| Replacement Parts for KK3 | ||
| Carbide Tipped Gripper Bolt(3/8-16 x 1/2) | KK2GR | 9.95 |
| Carbide Tipped Gripper Bolt(3/8-16 x 1) | KK3GR1 | 10.95 |
| Adjusting Screw w/nylon washer | KK3ASC | 28.00 |
| Lever Linkage 2 pcs. | KK2LL | 18.00 |
| Spring | KKSPR | 3.25 |
| Lever or Handle w/gripper | KK2LEV | 75.00 |
| Lock Pin | KK2LP | 8.95 |
| Zinc Plated Slide Tube | KK2ST | 64.00 |
| (Please contact us if you have any questions.) | ||
Orders can be placed by telephone, fax or email.
Visa, MasterCard and Discover accepted.
Check out the Kwik Klamp 1 (for 1"-2" pipe) & the Kwik Klamp 2 (for 2 1/2"-4" pipe)
J&K Tool Company, Inc.
6385 County Road 7 ~ Wheaton, MN 56296 USA
tel:
320 563 4967 fax: 320 563 8051
e-mail:
sales@jktool.com
HOME | KWIK KLAMP 1 | KWIK KLAMP 2 | KWIK KLAMP 3 | ELEVATORS | FLUSH JOINT CLAMP | Machine List
5"