JK Tool Company - KWIK KLAMP

J&K Tool Company, Inc.

Home Kwik Klamps Elevators Flush Joint Pipe Clamps Machine List

KWIK KLAMP 1

The most popular patented tool used worldwide by well drillers, pump installers,
well servicemen, and environmental drillers. J&K Tool Company, Inc. has been
manufacturing the Kwik Klamp for over 30 years.

+ All steel construction but light weight-only 14 lbs.
+ Easy to operate, over center locking of jaws when downward pressure is applied to lever.
+ KWIK KLAMP allows workers to bring pipe joint up to an easy working level.
+ Equipped with serrated and hardened replaceable jaws.
+ Excellent holding capability with load tests over 3000 lbs.
+ Designed to hold pipe sizes 1" - 2"(1.315"OD-2.375"OD) PVC, stainless, & galvanized.
(not intended for bare steel drill rod)
+ Safety pin to prevent accidental unclamping.
+ KWIK KLAMP is one of the safest time saving tools you will ever own.

Kwik Klamp1

Kwik Klamp 1 holding 2" stainless steel pipe on 8" casing.
The wide klamp base fits on many casing sizes.

Easy one hand operation.
Size adjustment and tension bolt located inside of
front jaw protected from dirt and water.

Kwik Klamp 1 Pricing
Description	Part #	Price
Kwik Klamp 1	KK1	$248.00

Replacement Parts for KK1
Jaw Set w/bolts	KK1JAW	$48.00
Adjusting Screw w/nylon washer	KK1ASC	$26.00
Lever Linkage 2 pcs.	KK1LL	$15.00
Spring	KK1SPR	$2.00
Lever or Handle w/gripper	KK1LEV	$42.00
Lock Pin	KK1LP	$7.75
Zinc Plated Slide Tube	KK1ST	$38.00
(Please contact us if you have any questions.)

Check out our Kwik Klamp 2
for pipe sizes 2 1/2"-4"

Check out the **NEW** Kwik Klamp 3
for pipe sizes 5" or 6"

Orders can be placed by telephone, fax or email.
Visa, MasterCard and Discover accepted.

J&K Tool Company, Inc.
6385 County Road 7 ~ Wheaton, MN 56296 USA
tel: 320 563 4967 fax: 320 563 8051
e-mail: sales@jktool.com