J&K Tool Company, Inc.
Home Kwik Klamps Elevators Flush Joint Pipe Clamps Machine List
     

KWIK KLAMP 2
(for pipe sizes 2 1/2" - 4")

 

    Kwik Klamp 2

The heavy duty KWIK KLAMP 2 is the driller's answer for holding the larger pipe sizes 2 1/2", 3", and 4".  KWIK KLAMP 2 is an enlarged version of our popular KWIK KLAMP 1 which is for pipe sizes 1" through 2", with many of the same features.  This tool has been used worldwide by environmental drillers, pump installers, well serviceman, and water well drillers.
bullet Main body is constructed of 2" and 2 1/2" 1/4" wall steel tube.
bullet Easy to operate, over center locking of jaws when downward pressure is
applied to a 19" long lever handle.
bullet 1/2" Safety pin used to prevent accidental unclamping.
bullet KWIK KLAMP2 allows workers to bring pipe or drill joint up to an easy working level.
bullet The tool weights only 30 lbs. and is 20" long x 7 1/2" wide.
bullet Jaws are equipped with 16 carbide tipped grippers.
bullet Excellent holding capability, with load tests done over 7,000 lbs.
bullet Designed to hold pipes 2 1/2", 3" and 4" (2.875"OD-4.5"OD) PVC, HDPE, stainless and galvanized steel.
bullet KWIK KLAMP is one of the safest, time saving tools you will ever own.


   
 4" pipe on 12" casing                   3" steel on 8" casing

Kwik Klamp 2 Jaw Set for 2" & 2 1/2" Pipe

  Kwik Klamp 2 jaws   Kwik Klamp 2 jaws open

* Especially designed for holding 2" and 2 1/2"(2.375"OD - 2.875"OD) pipe using the Kwik Klamp 2.
* Increased holding capacity for PVC and galvanized pipe.  *Jaw sets are not intended for bare steel drill rod.*
* Set of 4 serrated hardened jaws with bolts.

Kwik Klamp 2 Spacers for 4 1/2" Pipe

    KK2 spacers   KK2 spacers
Additional (4) spacers can be purchased to accommodate 4 1/2" pipe.
Spacers will be placed on the middle two jaw pads on each side.

Kwik Klamp 2 Pricing
Description

Part #

Prices
Kwik Klamp 2

KK2

US $475.00
1 set of 4 KK2 Jaws for 2"-2 1/2" pipe KK2JAW

 $99.00
1 set of 4 spacers for 4 1/2" pipe KK2SP4 $19.95
Replacement Parts for KK2
Carbide Tipped Gripper Bolt KK2GR 9.95
Adjusting Screw w/nylon washer KK2ASC 28.00
Lever Linkage 2 pcs. KK2LL 18.00
Spring KKSPR 3.25
Lever or Handle w/gripper KK2LEV 75.00
Lock Pin KK2LP 7.75
Zinc Plated Slide Tube KK2ST 64.00
     
(Please contact us if you have any questions.)

Orders can be placed by telephone, fax or email.
Visa, MasterCard and Discover accepted.

Check out the Kwik Klamp 1 (for 1"-2" pipe) & the Kwik Klamp 3 (for 6" pipe)

J&K Tool Company, Inc.
6385 County Road 7 ~ Wheaton, MN  56296  USA
tel: 320 563 4967  fax: 320 563 8051
e-mail: sales@jktool.com

HOME  |  KWIK KLAMP 1  |  KWIK KLAMP 2  |  KWIK KLAMP 3  |  ELEVATORS  |  FLUSH JOINT CLAMP  |  Machine List

"